Thursday, September 5, 2013

I Need More Fields! – Pushing Past The Limits of Title Block Update

Many companies have had to settle with placing some “specific” field in one of the ten default Drawing Properties. It could be as simple as needing a forth description line. Since there are only three default description fields, the forth description line more than likely ends up in the Project Code field.

Another example could be needing semi-project wide descriptions. The Title Block Update utility can become too restrictive in these instances.

I went on a quest to find the easiest way to push ALL title block attributes out to a spreadsheet and then pull the changes, project wide, back into Electrical. As always, please comment or e-mail me if you know of an easier/better way.

After some initial testing, I finally decided to focus on the existing Export To Spreadsheet utility.

Any block with a TAG1 attribute is exported using the Components option. So simply add an invisible TAG1 attribute with a default of TITLE. Also add another invisible attribute named LOC and add a default value of TITLE. This will allow us to create spreadsheets with only the title blocks.

imageNext we need to create a <<default.wda>> file.  Using the User Attributes command makes creating this text file quite easy. From the Reports tab click on User Attributes and then add all title block attributes to the list. These attributes will now be available in any of the component type reports.

This would be placed in the same support location the title block mapping file (.wdt) was placed in. Some networked support path or inside the active project folder.

 

image

imageThat’s it! We are ready to export all title block attributes project wide. From the Import/Export Data tab select To Spreadsheet. Select Components from the resulting dialog and press OK.
imageimage

The next dialog (Component Data Export) sets the scope of the export. In this case we want Project and a Named Location of TITLE. Pressing Drawing will show the list of locations and TITLE should be listed.

Press OK and specify a location for the Excel file. After opening the Excel file, scroll all the way over to the right and all the User Attributes will be listed with the values pulled from the drawings.

Once all needed changes to the title block attributes are completed its time to import back into AutoCAD Electrical.

Again from the Import/Export Data tab, but this time select From Spreadsheet. It should remember the name and location and simply require the press of the Open button. Worse case you may need to browse back out to the file location.

 

imageThe next dialog has a cool option that will force all spreadsheet values to upper case. Press Project and OK and all new values will update in each sheets title block.

image

 

 

 

The title blocks should not show on any BOM reports because of the lack of catalog information. To exclude them from the Component report place ~TITLE in the location code. This will exclude all blocks with a location of TITLE.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.